Among the information listed, take note of the following items.
Prepare the computer for disassembly Hp 6005 pro memory slots for Disassembly. If possible, move the computer to a clear, flat, stable work surface over an uncarpeted floor.
Follow these steps to check your computer memory in the BIOS: Before installing an expansion card, remove the expansion slot cover or the existing expansion card.
Remove the computer access panel Access Panel. The edges of metal panels can cut skin. Next, look at the Memory Bank information. This information will be useful when purchasing memory and when performing the next steps.
However, this maximum memory might be further limited by the operating system not being able to address the full range of physical memory. In Windows 8, fully shut down the computer by using the following steps: Rotate the hp 6005 pro memory slots cover retention latch back in place to secure the expansion card.
Use the following steps to insert a memory module into an empty socket: Use the following steps to remove a memory or continuity module: Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on the latch and rotating the latch to the open position.
When the first screen displays, immediately press the F10 key repeatedly, about once every second, until the Computer Setup program opens. To remove, replace, or add an expansion card: Type of memory including speed - It is recommended to get the same type of memory same size, same speed, same manufacturer for each slot.
Immediately press the F1 key if your computer was built before Windows XP or earlier. For example, if the computer is capable of holding a maximum of MB 4 GB of memory and the motherboard has four memory slots, install 1 GB or less per slot. Screw location your model might look different Slide off the panel to expose the inside of the computer.
HP Desktop PCs - Upgrading Memory (RAM)
This limitation is present on all bit hardware and bit operating systems and is not limited to HP and Compaq PC systems or Microsoft software operating systems. Store the removed card in anti-static packaging.
To find the amount of memory per slot, divide the maximum amount of memory that the computer can hold by the number of memory slots on the motherboard. See Maximum memory supported by operating system for more information. Use the steps for the BIOS version on your computer to find the exact memory configuration and how much memory can be purchased and installed.
Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis.
If not, make sure that you can return the memory if it is not recognized by the system after you install the new memory. Connect external cables to the installed card, if needed. Use the following steps to replace the cover: Unplug the power cable and press the Power button.
If the computer has an open socket, continue to Step 4 to add an additional memory module into the open socket. Click Power, press and hold the Shift key, and then select Shut down. Account for how much memory will be removed before purchasing your upgraded memory module s. Once you know the maximum for your system, check Maximum memory supported by operating system to see how much memory your version of Windows will support.
Refer to the Memory section within the product specifications document for memory information specific to your computer.
Memory modules are long thin boards, short in height, that stick up from the motherboard at a degree angle. Be sure not to scrape the card against the other components. Show me how Slide movable bays and sections back into their original positions and secure with screws.
Welcome to HP Customer Support
Turn on the computer. This has to be done before adding a new memory module. Memory information To find the total amount of memory that can be added, subtract the amount of memory currently in the computer from the maximum amount of memory the computer can hold. Determine if memory needs to be removed before installing additional memory in your desktop computer Use the following steps to locate the memory sockets: Remove the panel retaining screws.
Look inside the computer and locate the memory modules on the motherboard. This information may be listed under Memory Upgrade Information. If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket.
Use the following steps to install memory in an HP or Compaq desktop computer.